how to connect to an epson projector
Step 1: Make sure you have the appropriate cables. - HDMI cable to connect from your computer to your projector - VGA cable to connect from your computer to your projector (VGA is for older, non-HDMI capable projectors) Both of these are available at most electronics and office supply stores. Step 2: Plug one end of the HDMI or VGA cable into the back of your computer and plug the other end into the input port on your projector. If you're using an HDMI cable with a female connector, simply plug it in with no further configuration needed. If you're using a VGA cable, you must connect your computer to the projector with a mirror setting. Before plugging in the VGA cable, go to your computer's control panel > display settings and click on the "projector" tab. It should be set to "default monitor" when you first start up your computer. Change the setting of the "projector" tab to mirror mode and select your input. Image source